600MPa 級低碳微合金高強鋼的開發研究
- 文件介紹：
- 該文件為 rar 格式，下載需要 0 積分
-
- 600MPa 級低碳微合金高強鋼的開發研究Abstract This paper introduce development of 600MPa steel with low cost in Meishan. By using gleeble 3500 system,
the high temperature deforming properties、CCT Curve and Resistance of deformation of test steel is studied, a conclusion
is drawn that the test steel high temperature ductility area is 650～800℃and above 1300℃.High Nb make its CCT Cure
move strongly toward left,fine ferrite and bainite will appear on the condition cooling rate beyond 5℃/s,it seems that
high Nb has the same effect of Mo. The test steel has low alloy cost and relative low rolling force, the design of test steel
is suited to Meishan to produce high strength steel.
Key words high Nb, high strength, hot simulate, CCT, high temperature ductility
1 引言
進入21世紀以來，我國經濟高速增長，加速了我國鋼鐵材料的升級換代。但因梅鋼1422熱軋產線屬
于國外二手設備，雖然經過多次改造，產線精軋機架軋制力始終偏低,開發高強鋼受限。
高強、高韌鋼要求很高的精軋軋制力和高精軋累積壓下率要求，否則只有通過合金添加來開發，但合
金的添加會造成噸鋼成本增加。如果能找到一種精軋負荷不高、成本較低的產品設計，就可幫助梅鋼批量
生產高強鋼，提高梅鋼市場競爭力。
本文研究的屈服強度600 MPa級高強鋼是以貝氏體加少量鐵素體為基體組織，利用Gleeble3500熱模...
熱門關鍵詞： 
